|
Hold a
"starter superbrick stitch" as shown. |
|
Bring the
far strand UP and OVER towards you to form the first loop... |
|
Now take
the near strand UP and OVER away from you to form the second LOOP, next to the first. |
|
Start the
WEAVE by taking the short strand farthest from you UP and OVER the nearest
loop, then UNDER the farthest loop... |
|
...and
pull it all the way through. |
|
The second
strand comes UP and OVER from the other side, then UNDER the far loop... |
|
...and is
pulled through as well. |
|
Here we go
again, this time with the third strand, which should be of a different color
this time. UP and OVER the first loop, then UNDER the second loop... |
|
...and
pull through, yet again! |
|
Fourth
strand goes up and over the near, then under the far loop... |
|
...if you
did it right, it should look something like this. |
|
Almost
done! Take the fifth strand, of the 3rd color, up and over the first, then
under the second loop... |
|
This
SHOULD be getting easy for you now! Pull it on through! |
|
Last
strand... You know what to do, right?!? |
|
...and
after we've pulled it through! |
|
Double
check all your weaves before you start pulling! See how we have nothing but THREE SQUARE stitches here... |
|
Pull all
the strands tight... |
|
...repeat
the above, and it should begin to look like this... |
|
...and
here it is from the side! |
| Continue working the SuperBrick Stitch
until the SHORTEST working strand you have is between 3½ and 4 inches long,
then do a SUPERBRICK
COMPLETION STITCH to finish off the project. |
A SuperBrick Stitch Project, properly completed!
|
